NECK
| NECK MATERIAL： | FINGERBOARD: | TRUSS ROD: | NUT MATERIAL: |
|
Roasted quarter sawn maple&Match-color headstock（Built in carbon fiber rod) |
Rosewood | American Wolfgang (Two-way) | Bone |
| FRETS: | MACHINE HEADS: | SIDE DOTS: | POSITION INLAYS: |
| Stainless steel | SHIJIE locking tuners | luminescent inlays | Iridescent Mother of Pearl Shell |
BODY
|
BODY MATERIAL: |
BRIDGE: | PICKUPS: | PICKGUARD COLOR: |
| 2-Piece African mahogany | GOTOH 510T（tremolo） | Seymour Duncan SH-1N / TB-4 | None |
| ELECTRONICS: | ELECTRONICS LAYOUT: | FINISH: |
TOP WOOD: |
| Passive |
1 Vol / 1 Tone（Riboloff T-DA Smart Tone pot）/ 3-Way switch | Plum Burst |
5mm Roasted Maple top+1mm 5A Quilted Maple veneer |
DATA INFORMATION
| SCALE LENGTH: | FINGERBOARD RADIUS: | FRET SIZE: | NUT WIDTH: |
| 24.6" | 12" | 24 F (Middle-large size) | 42mm |
| CONSTRUCTION: | NECK CONTOUR: | ||
| Bolt-On | SHIJIE Thin C(1F:20mm,12F:21.5mm) | ||
| About Riboloff T-DA Smart Tone pot which activates coil splitting |
|
For the Shijie PDS S246 model guitar uses Riboloff dual element 11 detent Tone Control. This tone control offers extra bright tone not normally available with just a twist of the tone knob. When the tone knob is turned full up to last detent, this knob position splits the coils on both humbuckers. This full up tone knob position also by-passes the tone circuit making this position even brighter.
When rotating the knob 1 detent down towards 0 both pickups return to full humbucking mode. The tone circuit is also engaged. Rotating the knob further towards 0 one detent at a time yoi can notice the tone getting darker as expected with normal passive guitar tone controls.
The pickup selector works as normal 3 way pickup selector whether in humbucker or single coil mode. When pickup selector, selects both single coils to be engaged they are hum caneling in this position.
|